Run/Turn/Brake controller with Pulse Brake Capablity

Run/Turn/Brake controller with Pulse Brake Capablity
Item# K48590
$79.95

Product Information

By plugging this item into your wire harness (under your seat) you can change your rear turn signals into run/turn & brake, as easy as that. The OEM taillight on a stock H-D is not very bright but is the only light you now have on the rear. Getting rear ended by some jerk is not fun. Just remember you don't have a frame around you like you do in a car. You should have all the light you can on both the front & rear of your motorcycle.Fits: 2002 & later with factory cruise control. Direct plug in for 97 to 07 DYNAS, DRESSERS, ROAD KINGS, 96 TO 07 SOFTAILS and 99 TO 03 SPORTSTERS. This can also work on 04-10 Sportsters (except for XL1200N & XL88N) by using the K48310 adapter shown below.

Important Note: The load equalizer that comes with this unit is to be used when installing LED rear turn signals only.

If you are installing front and rear turn signals and your bike DOES NOT have a factory security device you will need to buy an additional load equalizer K48100 (1 load equalizer for each set of turn signals).

If you are installing front and rear LED turn signals and your bike DOES have a factory security device you will not be able to use the load equalizer supplied with the run/turn/brake controller. You will need to buy 1- K48100 and 1-K48570.