5 3/4 inch combo includes our Ventura Hwy. smooth chrome motorcycle headlight bucket with our diamond cut black dot head lamp

5 3/4 inch combo includes our Ventura Hwy. smooth chrome motorcycle headlight bucket with our diamond cut black dot head lamp
Item# HB51010-34

Product Information

**Buy a Combo and Save Big Time. Its almost like getting a head lamp for free**

Adjures 5 3/4 Ventura Hwy. headlight bucket and headlamp combination featuring our Smooth Chrome headlight bucket with our Diamond Cut "Trillient" Black Dot headlamp. Our headlight buckets feature our patented PHAST LOCK system. You can completely disassemble in seconds and reassemble in 1-2 minutes without the need of any tools. Adjures headlight bucket and headlamp combination comes to you completely assembled. We connect the ground wire to the bottom mounting bracket and run the high and low beam wires out of the wire hole located in the center of the mount. Both are male blade connectors. By mounting your bucket to the front end it will give you a good ground. You just need to plug in your high and low beam wires to the hi-low on your bike and your ready to roll. NO OTHER COMPANY CAN MAKE YOU THIS OFFER!

PHAST LOCK: Our Phast Lock system is our patented method of holding the bezel and lamp onto /into the headlight housing. There is nothing else like it on the market today. Once you use it you will never go back to the threaded bezels that cross thread and seize. You need ZERO tools to disassemble our buckets in seconds, and reassemble in 1-2 minutes.

****YOU GET**** Headlight Bucket, Headlamp, Headlight Bulb, Bulb Wire Harness, Both Bottom Mounts, Chrome Pinch Bolt with Chrome nuts & washers, Completely Assembled and our Patented ** Phast Lock ** System

Note: The use of higher wattage or cheap blue tinted bulbs will void your warranty. They run very hot and can create many problems with your lamp and wiring.


Motorcycle headlight bucket mount chrome pinch bolt, 2 chrome flat washers and a chrome hex nut
Motorcycle and Automotive headlight bulb wire harness
Adjures motorcycle and automotive headlight bulb wire harness. This is easy to install, the black wire is ground, yellow wire is low beam and the white wire is high beam. If you are installing our 5 3/4 inch lamps in a car with 4 headlights it is a must to use 2 of these so you don't have to cut on your stock wire harness. The reason is that all of our lamps come with an H4 hi-low beam bulb. Your stock outside bulbs are low beam and high so the have 3 connectors on the back. You inside lamps are only high beam and have 2 connectors.
3/4" Universal Block mount to be fixed to bottom Tree
3/4" Headlight bucket bottom mount. This billet aluminum mount is machined and polished to a high luster. It attaches to the bottom tree with a 3/8-16 bolt (not supplied). We highly recommend ordering the chrome pinch bolt shown below when ordering the mount. This mount is included with every headlight bucket we sell.