Beacon 2 motorcycle bullet light flush mount with a red LED and lens and a smooth chrome finish.
Beacon 2 motorcycle bullet light flush mount with a red LED and lens and a smooth chrome finish.
Item# NS24017-R3

Product Information

This is our smooth chrome Beacon 2 flush mount red lens LED motorcycle bullet light. These are used mostly as marker, running, turn or brake lights. These are extremely bright and will give you the extra amount of lighting you need on the rear. Our Beacon 1 LED motorcycle bullet lights are all made from die cast aluminum, polished to a fine finish and then given our 6 step double copper show chrome plate finish. They are about 1 1/4" around and are smaller than our Beacon 2 bullets. They are offered in 3 different mounting styles so make sure what you need before ordering. All of our beacon motorcycle bullet lights are sold in pairs only. With our different mounting brackets they will fit Harley Davidson, Victory, Triumph, Yamaha, Honda, Kawasaki, Suzuki and just about any and all motorcycles. If you are not sure exactly what you need give us a call. Our friendly staff is waiting for your call. By the way we have the best customer service in the motorcycle market.

RSS Design: The way we hold the bezel to the housing is called our RSS design which stands for Reverse Set Screw. There are 4 threaded holes 90 degrees apart on the housing of all of our motorcycle bullet lights. According to the way you mount the bullets, you put the set screw in the bottom hole with a drop of blue thread locker (included) and screw it in until it is flush with the housing. You then push the bezel over the o-ring until it is flush with the housing so that the hole in the bezel lines up directly over the set screw. You then turn the set screw counter clockwise (loosen) until it is tight against the bezel. No more lost bezels!

Measurements: Please click on our bucket measurements category. This will show you the measurements of all of our buckets.